(Code: 70710) Double air filter for Rotax 532 / 582 / 618 Distance between axis: 100 mm Diameter 52 mm (RC - 2820)
|
| (Code: 70724) Double air filter K&N para ROTAX 503 engine Distance between axis: 127 mm
|
| (Code: 70727) Air filter K&N for exhaust silencer all versions 2T. Diameter interior: 84 mm Diameter exterior: 117 mm Height: 114 mm
|
|
| (Code: 70320-06) Spring support for BING carburetor
|
| (Code: 70320-07) Bushel spring for BING carburetor
|
|
(Code: 70320-09) Cover for BING carburetor
|
| | |
| (Code: 70320-22) BING carburetor vessel
|
| (Code: 70320-23) Vessel fixation clip for BING carburetor
|
|
(Code: 70320-26) Slow screw spring for BING carburetor
|
| | (Code: 70320-28) Setting air tube carburettor BING
|
|
(Code: 70320-30) Ring for BING carburetor
|
| (Code: 70320-31) Starter spring with cable for BING carburetor
|
| |
| (Code: 70320-40) Principal nozzle for BING carburetor
|
| (Code: 70320-41) Manual ignition piston BING
|
|
(Code: 70320-42) BING carburetor spring
|
| (Code: 70320-44) Manual starter cap
|
| (Code: 70320-46) Nut M5 carburettor BING
|
|
(Code: 70320-47) Compression washer for BING carburetor
|
| | (Code: 70320-49) Handheld ignition kit (rep 41 to 48)
|
|
(Code: 70714) Conical air filter K&N diam 52 mm The K&N air filters are pre-oiled for immediate utilisation. They are approved and recognized by ROTAX® and all engines in the range have his model. These filters have cleaning possibilities thanks to K&N products or, more simply, with help of soap suds. This make our filters very economics. characteristics: The conical air filter K&N inside diameter 52mm. Used for every 2-stroke and 4-stroke ROTAX engines except the ROTAX 912.
|
| (Code: A000120) Water heating double high version. Made with welded aluminum evacuated extremely light according to its size (2.2 kg). This heating is fully equipped with the whole parts to fixate on the device so as every connection hoses, integrated expansion system and degassing system, tared cap 0.9 bar. An overflow tank must be planned. Fits for every 2t engines for enough air flow (see the engine installation notice). In and output diam: 25 mm. In principle, this heating doesn’t fit to engines located under cover ( congestion too important). Size: 2 x L: 109 mm x H: 375 mm. Weight: 2,200 kg
|
| (Code: A000130) Aluminum vacuum welded heating extremely light (0,860 kg). It is equipped with fixation points. Expansion system not integrated. Fits for every 2t engines for enough air flow (see the engine installation notice). In and output diam: 25 mm. Size: L: 415 mm x H: 142 mm. Weight: 0,860 gr
|
|
