| (Code: 70518-10) Oil heating 3/4 UNF - 10 rows
|
| (Code: 70518-13) Oil heating 3/4 UNF - 13 rows
|
|
(Code: 70518-16) Oil heating 16 rows 3/4 UNF
|
| (Code: 70520) Oil hose interior diam 12.7 mm – One meter.
|
| (Code: 70522-0) Aluminum connector 0° 3/4 UNF for 12,7mm hose
|
|
(Code: 70522-120) Aluminum connector 120° 3/4 UNF for 12,7 mm hose
|
| (Code: 70522-150) Aluminum connector 150° 3/4 UNF for 12,7 mm hose
|
| (Code: 70522-180) Aluminum connector 180° 3/4 UNF for 12,7 mm hose
|
|
(Code: 70522-45) Aluminum connector 45° 3/4 UNF for 12,7 mm hose
|
| (Code: 70522-90) Female aluminum connector 90° 3/4 for 12,7 mm hose
|
| (Code: 70523) FEM platinum allow mounting a heating to cool down the motor oil. Net for Subaru and the Jabiru ¾’’. Weight: 230 gr
|
|
| (Code: 70525) Filter support 3/4 UNF TOP 1/2 NTPF
|
| |
| | (Code: 70533-13) Oil heating 13 rows ¾. Width : 122 mm, depth : 50 mm, weight : 480 gr
|
|
| | (Code: 70534) Adapter male/male made with anodised aluminum to connect platinum
|
|
(Code: 70535-G) Adaptable oil heating for Rotax engine. Output center-to-center distance: 175 mm. Dimensions: 216 x 134 x 52 mm. Weight: 820 gr. Delivered with 4 fixation bolt and 2 90° outputs.
|
| (Code: 70535-M) Adaptable oil heating for Rotax engine. Output center-to-center distance: 175 mm. Dimensions: 216 x 96 x 52 mm. Weight: 610 gr. Delivered with 4 fixation nuts and 2 90° outputs.
|
| (Code: 70535-P) Adaptable oil heating for Rotax engine. Output center-to-center distance. Dimension: 216 x 83 x 52 mm. Weight: 557 gr. Delivered with 4 fixation nuts and 2 90° output.
|
|
(Code: 70541) Aeronautic oil hose. Interior diam 11 mm – One meter. This pipe is made with synthetic nitrile and reinforced in the inside and in the outside by a stainless steel braiding, which gives it a huge resistance to fire. It is light and flexible, fits as well for fuel circuit, cooling oil and liquid. Exists in different dimensions with anodized aluminum connector for many orientations.
|
| | |
(Code: 70547-12) Annealed stainless hose allows realizing the oil or fuel circuit with extreme bending avoiding elbow using. Life time nearly unlimited and low using risk because of friction. Sold by part according to your piece. Exterior diam: 12mm. Interior diam: 8.5 mm. Maximum pressure: 6 bars. Minimum bend radius: 50 mm. Weight: 197g per meter. Handed bending. Can be cut with a crosscut blade, tube cutter or hacksaw.
|
| | (Code: 70570) Oil hose 9.66 x 15 mm – One meter. Nitrile reinforced by a textile braid and covered with a synthetic rubber layer, exterior soft appearance. Blue color, resistant to temperature from -48°C to +150°C continuously.
|
|
