Err

AEROPARTS SHOP - Ulm Technologie
Search Your Cart

Pneumatic tools

(Code: 21162)
175.70 €
Case of 2 guns using the new low pressure HVLP technology. Low air consumption which reduces the dispersed fogs in the atmosphere. Multipurpose case par excellence, allows to apply the undercoats, paint or varnishes, including the water-soluble ones. Passages, nozzles and needles made with stainless steel. Guns delivered with cup and filter, all in a solid case in aluminium. HVLP gun adaptable with all the new water-based paints. These guns suit too for all the solvent-based products. Case's contain: 1 x 4100G spray gun, its cup and two hoods + needle + nozzles ø 1.4 and 1.8 mm 1 x retouching spray gun, its cup and two hoods + needle + nozzles ø 0.8 and 1 mm 1 x mini air purifier, with manual purge to eliminate a huge part of condensates present on the air network 1 x grip's analog pressure gauge with air flow adjustment graduted form 0 to 10 bar 1 x disassembly key 1 x cleaning brush 10 x change's micro filters
(Code: 33213)
544.78 €
Riveter full rivet. This kit includes every tools necessary to assemble and rivet every full rivets. Tool sets 3/32, 1/8, 3/16 for full rivets AN470 universal. – 3 tools to rivet AN426 – 2 retaining springs – 1 air regulator to adjust the pneumatic hammer – 1 pneumatic gun and its briefcase
(Code: 33255-00)
Pneumatic riveting tongs
140.50 €
Pneumatic rivet clamp. Working pressure 6,3 kg and 1/4” connectors. Rivet capacity: 2.4 mm, 3.2 mm, 4.0 mm, 4.8 mm. Weight: 1460g
(Code: 33260-01)
'Disc sander pneumatic high-speed 3
60.20 €
High speed disc sander, speed continuous setting. Speed 18.000 lap/min, working pressure 6,3 kg and 1/4 connector. Disc diameter: 75 /110 /140 mm. Weight: 1200 g
(Code: 33261-00)
60.20 €
Mini disc grinder. Speed: 18,000 round per minute, service's pressure of 6.3 kg and 1/4' connector Weight: 800 gr
(Code: 33265-00)
'1/4'' Reversible air ratchet'
83.10 €
Pneumatic ratchet wrench, speed continuous setting. Speed 240 lap/min, working pressure 6,3 kg and 1/4 connector. Capacity: M13 and couple 3,4kg/m. Weight: 550g
(Code: 33265-01)
'Pneumatic ratchet wrench 1 / 2 '''
83.10 €
Pneumatic ratchet wrench, speed continuous setting. Speed 240 lap/min, working pressure 6,3 kg and 1/2 connector. Capacity: M13 and couple 6,8kg/m. Weight: 550g
(Code: 33267-00)
Gun for silicone tube
39.70 €
Gun for silicone tube
(Code: 33268-00)
Pneumatic stapler 12.7 mm
108.40 €
Pneumatic stapler for 12.7 mm width staple and from 6 to 16 mm de depth. Suitable FASCO 80
(Code: 33269-00)
Pneumatic drill kit
83.10 €
Pneumatic drill kit. Speed 2.200 g.p.m, service's pressure of 6.3 kg and connector of 1/4'. Compartment of 10 mm, width of 250 mm Weight: 2,000 grams
(Code: 33272-00)
38.30 €
6 meters hose 6.5 x 10 mm - quick connectors
(Code: 33272-04)
Tip for 6 mm tube
1.50 €
(Code: 33272-05)
Tip for 8mm tube
1.50 €
(Code: 33273)
Air blow gun 100 mm
9.50 €
Air blow gun 100 mm (1/4') non welded steel with nylon fibre handle
(Code: 33274)
Compression tester 12 mm + 14
33.00 €
Compression tester with flexible pipe of 300 mm equipped of a 12 mm / 14 mm adaptater. Has a large face (Ø 50 mm) allowing to show the pressure in bar in a very lisible way from 0 to 21 bar.
(Code: 33274-12)
Adapter 12 mm for tester
6.00 €
Adaptater 12 mm for compression tester ref 33274
(Code: 33311)
173.38 €
Presentation: Pneumatic clecos clamp, it provides you with a gain of productivity while it reduces wrist tiredness. It allows you a fast installation and destruction of clecos. This clamp is perfect for every construction, including planes creation. Technical characteristics: • Boost engine lever • Pivoting support bracket 360° • Silent functioning • Built in U.S.A • Weight: 540 g
(Code: 33331)
Shears right tire
163.70 €
(Code: 33338)
Compressed air kit
59.90 €
Presentation: This tools kit very useful includes all the accessories that you need for your interventions which need the compressed air kit using. In this pack there are: - an air pump - a cleaning gun - a paint gun, ideal for spray paint - a compressed air-blower - a flexible pipe All the accessories are made from mould aluminum under pression.