Err

AEROPARTS SHOP - Ulm Technologie
Search Your Cart

Probes & Sensors

(Code: 62511)
Float sender (horizon)
61.00 €
Horizontal lever gauge – Diam 70 mm – Interior : 40 mm – Length : 300 mm – Leverarm in the tank: 250 mm maxi. For flat tank with a round float – Weight: 120g – The gauge can be shorted in order to adapt it to your needs and to use the course.
(Code: 62019)
Sensor inducted 6 mm
66.08 €
Inductive captor for VDO RPM indicator. Works with VDO and digitals RPM indicators. Fits very weel to JABIRU motor. Dimension: 6.35 mm x 22 mm. ¼ net, 28 UNF, 2A. Res 130O ±10%. Induct 12mH ±10% Pick 10V
(Code: 62028)
Sender
84.90 €
Oil pressure sensor - 10 Bars - 10x100 VDO sensor - 10 or 5 bars, attached by M10x100 screws
(Code: 62029)
Pressure probe 10 bars + alarm
93.62 €
Oil pressure sensor - 10 Bars + low pressure alarm 0,5 Bars
(Code: 62030)
Pressure probe 5 bars + alarm
106.74 €
Oil pressure sensor 5 Bars + low pressure alarm 0.7 bars – Attachment through 1/8’ screws
(Code: 62031)
Pressure probe 10 bars 1/8'
78.71 €
VDO oil pressure sensor - 10 Bars - Attachment through 1/8' screws
(Code: 62032)
Pressure probe 5 bars 1/8'
66.86 €
Oil pressure sensor 5 Bars 1/8'' - 10 or 5 bars - Attachment through 1/8' screws
(Code: 62038)
Pressure probe 5 bars + alarm
107.99 €
VDO oil pressure sensor – 10 Bars + low pressure alarm 0.8 Bars – Or pressure sensor 5 Bars + low pressure alarm 0.7 Bars – Attachment through1/8’ screw
(Code: 62047)
Fastening clip
32.38 €
Jaug fixation clamp - Ext diam 65 mm - Int diam 40 mm - Drill: 5 mm - Delivered with 5 scews and washers
(Code: 62059)
oil pressure switch
58.63 €
Contact mano oil pressure 1/8’’ – Contact manometer oil pressure, the contact closes as soon as the oil pressure reaches 4 PSI, allows the hour meter to work out only when the motor functions. Net: 1/8’’ – Weight: 58 gr
(Code: 62069)
'EGT probe clamp type 7/8'' - 2,5''
40.64 €
(-15.00%) 34.54 €
Outlet sensor collar. Length : 25 mm interior which exceeds the collar. Collar between 38 and 63 mm – Weight: 51gr
(Code: 62072)
Lever gauge for fuel level ind
103.48 €
Lever gauge (20 to 60 cm) Diam 54 mm (drilling whole) Exterior diam 72 mm Depth: 250 mm
(Code: 62074-05)
'Digital Altimeter 2 1/4'''
68.40 €
EGT sensor with 2,5m cable + stainless attache to meld
(Code: 62074-06)
'Digital Altimeter 2 1/4'''
48.60 €
Outside Air Temperature (OAT) sensor with 2,5m link
(Code: 62074-07)
'Digital Altimeter 2 1/4'''
31.20 €
Carburetor Air Temperature (CAT) sensor - 10 x 100 let - 2,5m link
(Code: 62074-08)
'Digital Altimeter 2 1/4'''
117.60 €
Fuel pressure sensor for EIS Flybox instrument with 2m link + connectors
(Code: 62075)
EGT senser with screw M8 x 1mm
40.28 €
(-15.00%) 34.24 €
EGT sensor with screw - Weight: 45 gr
(Code: 62076)
Sender CHT 10 mm
19.26 €
(-15.00%) 16.37 €
Cylinder head sensor CHT Diam 10 mm - Weight: 26 gr
(Code: 62077)
Probe T° cylinder CHT 14 mm
19.26 €
(-15.00%) 16.37 €
Cylinder head temperature sensor for spark plus - Diam 14 mm
(Code: 62091)
Probe T° oil VDO M10 x 150
40.68 €
150°C temperature sensor - M10 x 150 mm
(Code: 62092)
Sender CHT 18 mm
19.26 €
(-15.00%) 16.37 €
Yoke temperature sensor - Diam 18 mm - Weight: 27 gr
(Code: 62094)
Pressure sensing probe 5 bars
75.52 €
Oil pressure sensor 5 bars - 10 x 100 - VDO - 10 or 5 Bars - Fixed with M10 x 100 screws
(Code: 62095)
Probe T° oil VDO M10 x 100
30.22 €
150°C temperature sensor - Oil temperature sensor from 0 to 150°C - 10 or 5 Bars - Fixed with M10x100 screws
(Code: 62096)
Probe oil thermoco VDO M10x100
53.60 €
120°C temperature sensor - Water temperature sensor from 0 to 120°C - Fixed wiht M10 x 100 screws
(Code: 62097)
Probe T° cylinder CHT 12 mm
19.26 €
(-15.00%) 16.37 €
Cylinder temperature sensor - CHT 12 mm - Weight: 26 gr
(Code: 62098)
Probe T° oil 150°C - 1/8'
30.58 €
150°C temperature sensor - C 1/8''
(Code: 62099)
Probe T° water 120°C - 1/8'
32.48 €
120°C temperature sensor – 1/8’’ – Water temperature sensor from 0 to 120°C, fixed with 1/8’’ screws, fits for 2 times Rotax motors.
(Code: 62101)
Probe adapter 1/8' - 5/8'
10.30 €
1/8’’ – 5/8’’ adapter. Sensor adapter to use to measure water and oil temperature or oil pressure from 1/8’’ to other nets. Allow to mount 1/8 sensors to continental motors.
(Code: 62102)
Probe adapter 1/8' - 10 x 1
8.50 €
1/8'' adapter - 10 x 100 - Exclusively reserved for pressure sensor.