| (Code: 61150-03) Carburetor temperature sensor NPT, (thread 1/4 x 28").
|
| (Code: 61150-04) Active oil or fuel pressure sensor (0 to 10 bar / 0 to 145 psi). 1/8 – 27 NPT thread. For all engines
|
|
(Code: 61150-12) CHT Sender (Type J) with 12 mm ring terminal for Jabiru engine.
|
| (Code: 61150-13) Thermocouple adjustable bayonet (type J). bushing 3/8”-24, tip 2 1/2” x 3/16”. For Lycoming engines.
|
| (Code: 61150-11) Courrent transducer +/- 60 A
|
|
(Code: 62074-05) EGT sensor with 2,5m cable + stainless attache to meld
|
| (Code: 62074-06) Outside Air Temperature (OAT) sensor with 2,5m link
|
| (Code: 62074-07) Carburetor Air Temperature (CAT) sensor - 10 x 100 let - 2,5m link
|
|
(Code: 62069) Outlet sensor collar. Length : 25 mm interior which exceeds the collar. Collar between 38 and 63 mm – Weight: 51gr
|
| (Code: 62075) EGT sensor with screw - Weight: 45 gr
|
| (Code: 62047) Jaug fixation clamp - Ext diam 65 mm - Int diam 40 mm - Drill: 5 mm - Delivered with 5 scews and washers
|
|
(Code: 62105-02) Supplementary econometer sensor FC
|
| (Code: 62105-04) Supplementary econometer sensor FC
|
| (Code: 62074-08) Fuel pressure sensor for EIS Flybox instrument with 2m link + connectors
|
|
(Code: 61150-05) Active fuel pressure sensor (0 to 1 bar / 0 to 15 psi). 1/8 – 27 NPT thread. For all engines
|
| (Code: 62232-S) Fuel pressure sensor from 0 to 15 PSI - Diam 52 mm
|
| (Code: 61150-06) Fuel pressure sensor fitting – 6 mm hose
|
|
(Code: 61150-08) Fuel pressure sensor fitting – 8 mm hose
|
| (Code: 62072) Lever gauge (20 to 60 cm) Diam 54 mm (drilling whole) Exterior diam 72 mm Depth: 250 mm
|
| (Code: 62198) Pressure probe fuel for MITCHELL manometer form 0 to 30 PSI Wieght: 122g - Unity
|
|
(Code: 62059) Contact mano oil pressure 1/8’’ – Contact manometer oil pressure, the contact closes as soon as the oil pressure reaches 4 PSI, allows the hour meter to work out only when the motor functions. Net: 1/8’’ – Weight: 58 gr
|
| (Code: 62029) Oil pressure sensor - 10 Bars + low pressure alarm 0,5 Bars
|
| (Code: 62031) VDO oil pressure sensor - 10 Bars - Attachment through 1/8' screws
|
|
(Code: 62030) Oil pressure sensor 5 Bars + low pressure alarm 0.7 bars – Attachment through 1/8’ screws
|
| (Code: 62038) VDO oil pressure sensor – 10 Bars + low pressure alarm 0.8 Bars – Or pressure sensor 5 Bars + low pressure alarm 0.7 Bars – Attachment through1/8’ screw
|
| (Code: 62032) Oil pressure sensor 5 Bars 1/8'' - 10 or 5 bars - Attachment through 1/8' screws
|
|
(Code: 62094) Oil pressure sensor 5 bars - 10 x 100 - VDO - 10 or 5 Bars - Fixed with M10 x 100 screws
|
| (Code: 62102) 1/8'' adapter - 10 x 100 - Exclusively reserved for pressure sensor.
|
| (Code: 62103) 1/8’’ adapter – 12 x 150 – Sensor adapter for water and oil temperature and oil pressure from 1/8’’ to other nets.
|
|
(Code: 62104) 1/8’’ adapter – 14 x 150 – Sensor adapter for water and oil temperature and oil pressure from 1/8’’ to other nets.
|
| (Code: 62101) 1/8’’ – 5/8’’ adapter. Sensor adapter to use to measure water and oil temperature or oil pressure from 1/8’’ to other nets. Allow to mount 1/8 sensors to continental motors.
|
| (Code: 62229-12) Sensor CHT 12 for SPEED instrument - Weight 14 gr
|
|
(Code: 62229-14) Sensor CHT 14 for SPEED instrument - Weight 15 gr
|
| (Code: 62229-VIS) Sensor EGT with screw - Weight: 26 gr
|
| (Code: 62132-01) Sensor for rotor RPM indicator. The RT2 is a multifunctional digital counter easy to use, disposing of a LCD four figures screen, exact same conception than the RT1. There is, in the same time, a rotor revolution counter, a chronometer and a rotor full hour meter easy to use. – Four figures LCD screen to know accurately your rotor revolutions and its functioning time, with3 color LED in order to ess instantly its system. Standard 2’ ¼ (57 mm) – Supply tension: 10~30V – Consumption: 40 mA – Functioning range: from 200 to 800 revolutions/ min – Weight: 103gr.
|
|
(Code: 62096) 120°C temperature sensor - Water temperature sensor from 0 to 120°C - Fixed wiht M10 x 100 screws
|
| (Code: 62097) Cylinder temperature sensor - CHT 12 mm - Weight: 26 gr
|
| (Code: 62077) Cylinder head temperature sensor for spark plus - Diam 14 mm
|
|
(Code: 62098) 150°C temperature sensor - C 1/8''
|
| (Code: 62095) 150°C temperature sensor - Oil temperature sensor from 0 to 150°C - 10 or 5 Bars - Fixed with M10x100 screws
|
| (Code: 62091) 150°C temperature sensor - M10 x 150 mm
|
|
(Code: 62099) 120°C temperature sensor – 1/8’’ – Water temperature sensor from 0 to 120°C, fixed with 1/8’’ screws, fits for 2 times Rotax motors.
|
| | (Code: 61150-09) Proximity sensor for rotor RPM (12 to 24 V DC)
|
|
(Code: 62028) Oil pressure sensor - 10 Bars - 10x100 VDO sensor - 10 or 5 bars, attached by M10x100 screws
|
| (Code: 62076) Cylinder head sensor CHT Diam 10 mm - Weight: 26 gr
|
| (Code: 62092) Yoke temperature sensor - Diam 18 mm - Weight: 27 gr
|
|
| (Code: 62019) Inductive captor for VDO RPM indicator. Works with VDO and digitals RPM indicators. Fits very weel to JABIRU motor. Dimension: 6.35 mm x 22 mm. ¼ net, 28 UNF, 2A. Res 130O ±10%. Induct 12mH ±10% Pick 10V
|
| (Code: 62299-160) Tube gauge 16 cm - Other length are available - Gauge diam: 40 mm - Betwenn 60 and 90 Ohm
|
|
(Code: 62299-220) Tube gauge 22 cm - Other length are available - Gauge diam: 40 mm - Between 60 and 90 Ohm
|
| (Code: 62299-280) Tube gauge VDO 28 cm - Other length are available - Gauge diam: 40 mm - Between 60 and 90 Ohm
|
| (Code: 62299-340) Tube gauge 34 cm - Other length are available - Gauge diam: 40 mm - Between 60 and 90 Ohm
|
|
(Code: 62299-400) Tube gauge VDO 40 cm - Between 60 and 90 Ohm
|
| (Code: 62299-500) Tube gauge VDO 50 cm - Between 60 and 90 Ohm
|
| (Code: 62299-790) Tube gauge 79 cm - Between 60 and 90 Ohm
|
|
(Code: 62299-700) Tube gauge VDO 70 cm - Between 60 and 90 Ohm
|
| | |
