Err

AEROPARTS SHOP - Ulm Technologie
Search Your Cart

Spare parts

(Code: 74362-01)
BRUSH/FOR SLP RNGS
17.10 €
Carbon (mass) for IVOPROP propeller (spring)
(Code: 74362-02)
BRUSH/FOR E MOTOR
17.10 €
Carbon (device) for IVOPROP propeller (thread)
(Code: 74362-03)
Came a 90 ° helix Ivoprop
22.30 €
90° pawl for Ivoprop propeller - Exterior diam: 11 mm - Interior diam: 8 mm
(Code: 74512-DX)
FC WINDSPOON Right Blade
404.41 €
The DUC FC right propeller presents a complex form called WINDSPOON allowing a decrease of the vortex created at the end of the blade, an opposed spin to organize an air flow on every surface of the blade, a shifted spinning axis to improve the resistance to efforts and a better efficiency. Weight: 735g. Be careful: precise the device and the model while ordering.
(Code: 74512-SX)
FC WINDSPOON Left Blade
404.41 €
The DUC FC propeller presents a complex form called WINDSPOON allowing a decrease of the vortex created at the end of the blade, an opposed spin to organize an air flow on every surface of the blade, a shifted spinning axis to improve the resistance to efforts and a better efficiency. Weight: 735g. Be careful: precise the device and the model while ordering.
(Code: 74515-DX)
Pale spare SWIRL right
384.00 €
Thanks to its extra flat profile and a little rope, the SWIRL DUC blade has been studied in order to get a constant speed effect. It has been elaborated to get maximum constraints while twisting and bending. As the DUC FC blade, it has been through mechanic resistance test in order to homologate. Weight: 818 gr. Be careful: precise the device and the model of the aircraft while ordering.
(Code: 74515-SX)
Pale spare SWIRL left
384.00 €
Thanks to its extra flat profile and a little rope, the SWIRL DUC blade has been studied in order to get a constant speed effect. It has been elaborated to get maximum constraints while twisting and bending. As the DUC FC blade, it has been through mechanic resistance test in order to homologate. Weight: 818 gr. Be careful: precise the device and the model of the aircraft while ordering.
(Code: 74516-DX)
Pale spare SWIRL INCONEL
522.61 €
INCONEL SWIRL blades have the leading edge protected with an INCONEL backup, fireproof stainless with a really high hardness of the surface. Weight: 848 gr. Be careful: precise the device and the model of the aircraft while ordering.
(Code: 74516-SX)
Pale spare SWIRL INCONEL
432.00 €
INCONEL SWIRL blades have the leading edge protected with an INCONEL backup, fireproof stainless with a really high hardness of the surface. Weight: 848 gr. Be careful: precise the device and the model of the aircraft while ordering.
(Code: 74517)
Half-propeller hub DUC
180.00 €
The DUC propeller hubs are realized with the CARBONE FORGE process. Half the hubs have been tested to mechanical resistance, comparing it to identic geometry pieces realized with different forged aluminum alloy. Results have shown an equivalent resistance and a considerable gain of weight (divided by 2). Weight: 110g
(Code: 74518)
brace for hub propeller DUC
40.80 €
Positioned between the two half hub made with forged carbon, this golden anodized aluminum spacer avoids crashing the hub while clamping the propeller. Weight; 135.5 g. Be careful: precise the device and the model of the aircraft while ordering.
(Code: 74519-100)
Kit of screws and bolts Propeller D
34.80 €
Screwing kit to fixate the DUC propeller on a propeller shaft. Clamping couple: 2.5 kg/m 25Nm. Kit weight: 210g. Be careful: precise the device and the model of the aircraft while ordering.
(Code: 74519-120)
Kit of screws and bolts Propeller D
33.60 €
Screwing kit to fixate the DUC propeller on a propeller shaft. Clamping couple: 2.5 kg/m 25Nm. Kit weight: 210g. Be careful: precise the device and the model of the aircraft while ordering.
(Code: 74524)
Half propeller hub DUC three-bladed
180.00 €
The DUC propellers hubs are realized with the CARBONE FORGE process. Half the hubs have been mechanically studied to resist, and compared with parts whose geometry is the same but forged with different aluminum alloy. Results have proved an equivalent resistance and a considerable gain of weight (divided by 2). Weight: 210g – 100 CV. Be careful: precise the device and the model of the aircraft while ordering.
(Code: 74525-01)
Repair kit propeller DUC
27.60 €
Used if tiny impacts or shrapnel’s are present on blades. Can be used to maintain the propeller.
(Code: 74560)
Complete two-blade hub, 4 strokes
421.20 €
DUC propeller hub have been realized with CARBONE FORGE process. Half the hub have been studied to mechanical resistance in comparison with identical geometric pieces realized with different forged aluminum alloy. Results have shown an equivalent resistance with a huge gain of weight (divided by 2) Weight: 920g
(Code: 74561)
Complete three-blade hub, 4 strokes
367.20 €
DUC propeller hub have been realized with CARBONE FORGE process. Half the hub have been studied to mechanical resistance in comparison with identical geometric pieces realized with different forged aluminum alloy. Results have shown an equivalent resistance with a huge gain of weight (divided by 2) Weight: 921g