Err

Composite propellers

(Code: 74508-D)
Flash-L Inconel three-blade propeller, right - DUC Hélices
2,214.00 €
Ideal for Rotax 912S (100hp) engines AND aircraft requiring a small Ø210mm propeller cone
(Code: 74600)
1,260.00 €
HELIX three bladed propeller 912 propulsive
(Code: 74701-R)
Spinner for tri-blade ajust pitch i
2,265.60 €
DURANDAL 100 – Tug – Active three-bladed for engine Rotax 912S, 912iS and 914, tug using. Settable pitch on the ground. Reinforced leading edge Nanostrength. Diam: 170, 175 or 180 cm. Mass: 2,8 kg – Inertia moment: 3.800 kg/cm² - Maximum traction: 282 kg with 2550 tr/min
(Code: 74701-D)
Spinner for tri-blade ajust pitch i
1,920.00 €
100% carbon three-bladed propeller DURANDAL100 with settable pitch on the ground for Rotax 912S, 912iS and 914 tractive. Diam from 155 to 190 to choose according to your aircraft. Tractive three-bladed for engine Rotax 912S, 912iS and 914. Settable pitch on the ground. Reinforced leading edge Nanostrength. Mass: 2,6 kg – Inertia moment: 3.000 kg/cm² - Maximum traction: 240 kg with 2550 tr/min
(Code: 74516-D)
SWIRL-2 Inconel right three-blade propeller - DUC Hélices
2,304.00 €
Hub Ø101.6mm (4") - Mounting 6 CHC M8 screws with 14mm pins
(Code: 74513-D)
SWIRL-2 Inconel twin-blade propeller, right - DUC Hélices
1,764.00 €
Compact hub Ø101.6mm (4") - Mounting 6 CHC M8 screws with 14mm pins
(Code: 74514-D)
SWIRL-2 Inconel twin-blade propeller, right - DUC Hélices
1,710.00 €
Hub Ø101.6mm (4") - Mounting 6 CHC M8 screws with 14mm pins
(Code: 74517-D)
SWIRL-3 Inconel three-blade propeller, right - DUC Hélices
2,052.00 €
Reference propeller for Rotax 912S/iS (100hp) and Rotax 914 (115hp) engines
(Code: 74504-SX)
Three-blade FC left - DUC Hélices
2,034.00 €
The DUC FC propeller presents performance unparalleled thanks to its revolutionary form called WINDSPOON. In its two or three-bladed, propelling or tractive, blades’ really special profile was calculated to organize the air flow on every surface of the WINDSPOON. The shifted kinking center creates an improvement of the resistance to efforts, and a higher longevity. Its technical innovations have many effects: better performance, consumption decrease, noise suppressor. Diam 1727 mm – Weight: 3115g – Be careful: precise the device and the model while ordering
(Code: 74591-DX)
Three-blade Inconel FLASH propeller, Right
2,304.00 €
Three-bladed DUC Inconel Flash propeller (right). New innovating design for a strong extension while cruising (new definition of the kinking axis and the center of pressure).
(Code: 74502-DX)
Three-blade Inconel SWIRL-3-L, Right - DUC Hélices
1,962.00 €
Ideal for engines Rotax 912 (80hp) or Rotax 912S/iS (100hp) AND aircraft requiring a small propeller spinner Ø210mm
(Code: 74590-DX)
Three-blade SWIRL, Right
1,710.00 €
Two-bladed DUC Inconel Flash propeller (right). New innovating design for a strong extension while cruising (new definition of the kinking axis and the center of pressure). Strong “constant speed” effect and high performance. Low consumption and sound nuisance reduction. Blades and hubs made with composite, look like carbon. The FLASH blades and hub are built according to the DUC technology, from unidirectional carbon fibers pre impregnated with epoxy resin. Low weight and inertia. High accuracy manufacturing. Hub equipped with metal inserts. Diam: 1625 to 1854 mm (64” to 73”) Weight: 4,4 kg. Leading edge reinforced with Inconel. Application: light plane with tractive configuration. Engine from 100 to 180 CV: Rotax, Jabiru, VW, Continental, Lycoming… Be careful: precise the engine and the model of the aircraft while ordering.
(Code: 74510-DX)
Two-blade Inconel SWIRL, Right - DUC Hélices
1,286.40 €
In its INCONEL version, this propeller presents the same advantages than the standard version. Blades SWIRL INCONEL have the particularity to protect the leading edge with an INCONEL backup, fireproof stainless with a surface really solid.